HR-M28A-ANV thermosetting FIP conductive rubber is made of thermosetting silicone rubber system and graphite nickel plated conductive particles, and the product is packaged in a single component form. When in use, the fluid like rubber is pressed out of the packaging tube by air pressure and applied to the fingers. Just fix the position. Usually, after curing at 150 ° C for 30 minutes, HR-M28A-ANV can be made into fine conductive rubber pads with good conductivity and excellent shielding performance, which can well meet the electromagnetic shielding, grounding, and environmental sealing requirements of electronic device casings, such as water vapor and dust.
■ Good thixotropy and adhesionNaturally
■ It has good electrical conductivity after solidification
■ Dotting molding is performed on a metal or plastic substrate
■ It has excellent resilience
■ Applicable to FIP dispensing, saving labor and reducing material waste
Customizable 【 e.g. Weight (30cc/50cc/300cc/1kg/) can 】
■ Communications base station
■ Medical electronic equipment, GPS and other electronic equipment
■ Industrial machinery, automotive electronics (EMI/RFI shielding)
| Physical Properties | Property | Value | Unit | Test Method |
| Product Composition | AG/AI | NA | ASTM D5470 | |
| Elastomer | Silastic | NA | NA | |
| Curing method | Thermocuring | NA | NA | |
| Component | 2.3+0.2 | NA | ASTM D412 | |
| Tensile Strength | Monocomp onent |
% | NA | |
| AB Mixing Ratio | ≥1.0 | MPa | ASTM D412 | |
| Hardness | 55±5 | Shore A° | ASTM D2240 | |
| Operating temperature | -50~150 | ℃ | NA | |
| Peel force bonded with the aluminum alloy | ≥1.0 | MPa | JSCR-10-QA002 | |
| Storage conditions | -20~-10 | ℃ | NA | |
| Shelf life | 6 | Months | NA | |
| Electrical Properties | Volume resistivity | <0.05 | Ω.cm | MIL-DTL-83528C |
| Shielding effectiveness 30MHz~10GHz | >90 | dB | MIL-DTL-83528C |
Zhengji New Materials Industrial Park, No. 6 Xufeng Road,
Zhengji Town,Tongshan District, Xuzhou City, Jiangsu Province
Privacy settings
.png)
.png)
